Conditions for Running the DTCs

WARNING: This page is about a different variant/trim than selected.

P0601, P0602, P0630

These DTCs run continuously when the ignition is in ON.

P0603, P062F

These DTCs run once per ignition cycle.

P0604

DTC P0604 runs continuously when the ignition is ON for greater than 30 s.

P0606

DTC P0606 runs continuously when Ignition 1 Signal voltage is greater than 11 V.

P16F3

The engine speed is greater than 500 RPM.
DTCs P0101, P0102, P0103, P0106, P0107, P0108, P2227, P2228, P2229, or P2230 are not set.
DTC P16F3 runs continuously when the above conditions are met.

P262B

DTC P262B runs on ECM power down.