Conditions for Setting the DTC

WARNING: This page is about a different variant/trim than selected.

P182E

Internal mode switch does not indicate a valid Park, Reverse, Neutral, or Drive Range position for 7 s.

P1915

Internal mode switch does not indicate Park or Neutral during the following sequence:

Engine speed is less than 50 RPM for greater than 0.10 s.
Engine speed is 50-480 RPM for greater than 0.07 s.
Engine speed is greater than 500 RPM and the transmission input speed is greater than 100 RPM for greater than 1.25 s.