Conditions for Setting the DTC

WARNING: This page is about a different variant/trim than selected.

P0850 and P0851

ECM detects the Park/Neutral switch signal equals 0 volts (Park/Neutral) when the IMS reports a Drive range.
Throttle position is 10 percent or greater.
Engine torque is 75 (55 lb ft) or greater.
Vehicle speed is 10 km/h (6 mph) or greater.
Above conditions must be met for .2 seconds.

P0852

ECM detects the Park/Neutral switch signal equals 12 volts (In-Gear) when the IMS reports a Park/Neutral range for 0.2 second.