Conditions for Running the DTC

WARNING: This page is about a different variant/trim than selected.

P0815 or P0816

Engine speed is 400 RPM or greater for 5 seconds.
Ignition voltage is 9.0 V or greater.
DTC P0815, P0816, P0826, P1761, P182E, P1876, P1877, or P1915 is not set.
Time since the last gear range change is greater than 1 second.

P0826

Engine speed is 400 RPM or greater for 5 seconds.
Ignition voltage is 9.0 V or greater.
DTC P0826 or P1761 is not set.