Removal Procedure
WARNING: This page is about a different variant/trim than selected.
- Drain the cooling system. Refer to Cooling System Draining and Filling
- Remove the transaxle oil cooler hoses from the oil cooler fittings on the radiator. Refer to Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection
- Remove the oil cooler fitting from the radiator.
NOTE:
Do not remove the upper and lower transaxle oil cooler fittings from the radiator at the same time other wise the transaxle oil cooler will fall inside the radiator end tank.