LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Sonic RS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Automatic Transmission - 6T30/6T40 - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Manual Shift Shaft and Seal Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Install the manual shaft and position switch assembly. Refer to Manual Shift Detent Lever with Shaft Position Switch Assembly Replacement .
  2. Fig 1: Identifying Seal Installation Tool J-46626
    GM2079287Courtesy of GENERAL MOTORS COMPANY
  3. Install the manual shaft seal (1) using DT-49101  seal installer.
  4. Install the battery tray. Refer to Battery Tray Replacement .