Fastener Tightening Specifications
WARNING: This page is about a different variant/trim than selected.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Camshaft Position Sensor Fastener | 6 N.m | 54 lb in |
| Crankshaft Position Sensor Retaining Bolt | 5 N.m | 44 lb in |
| Ignition Coil Fasteners | 9 N.m | 80 lb in |
| Engine Control Module Fasteners | 10 N.m | 89 lb in |
| Engine Coolant Temperature Sensor | 20 N.m | 15 lb ft |
| Evaporative Emission Canister Bracket Fasteners | 10 N.m | 89 lb in |
| Evaporative Emission Canister Purge Solenoid Fastener | 5 N.m | 44 lb in |
| Exhaust Gas Recirculation Valve Fasteners | 10 N.m | 89 lb in |
| Exhaust Gas Recirculation Valve Pipe Fasteners | 6 N.m | 59 lb in |
| Fuel Tank Filler Pipe Bracket Fasteners | 9 N.m | 89 lb in |
| Fuel Rail Retaining Fasteners | 10 N.m | 89 lb in |
| Fuel Tank Strap Fasteners | 22 N.m | 16 lb ft |
| Hose Clamps | 4 N.m | 35 lb in |
| Knock Sensor Fastener | 20 N.m | 15 lb ft |
| Manifold Absolute Pressure Sensor Fastener | 10 N.m | 89 lb in |
| Heated Oxygen Sensor Fastener | 42 N.m | 31 lb ft |
| Spark Plugs | 25 N.m | 18 lb in |
| Throttle Body Fasteners | 9 N.m | 80 lb in |