Typical Scan Tool Data
WARNING: This page is about a different variant/trim than selected.
MAP Sensor
| Circuit | Short to Ground | Open | Short to Voltage |
|---|---|---|---|
| Operating Conditions:
Engine running at various operating conditions Parameter Normal Range: 12-103 kPa (1.7-14.9 PSI) (varies with altitude) |
|||
| 5 V Reference | 0 kPa (0 PSI) | 0 kPa (0 PSI) | 128 kPa (18.6 PSI) |
| Signal | 0 kPa (0 PSI) | 0 kPa (0 PSI) | 128 kPa (18.6 PSI)* |
| Low Reference | - | 80-128 kPa (11.6-18.6 PSI) | - |
| * Internal ECM or Sensor damage may occur if the circuit is shorted to B+. | |||
MAP Sensor, if equipped with Turbocharger
| Circuits | Short to Ground | Open | Short to Voltage |
|---|---|---|---|
| Operating Conditions:
Engine running at various operating conditions Parameter Normal Range: 12-225 kPa (1.7-32.6 PSI) (varies with altitude) |
|||
| 5 V Reference | 0 kPa (0 PSI) | 0 kPa (0 PSI) | 255 kPa (36.9 PSI) |
| Signal | 0 kPa (0 PSI) | 0 kPa (0 PSI) | 255 kPa (36.9 PSI)* |
| Low Reference | - | 255 kPa (36.9 PSI) | - |
| * Internal ECM or sensor damage may occur if the circuit is shorted to B+. | |||