LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Sonic RS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Mechanical - 1.8L (LUW, LWE)) >> Repair Instructions - On Vehicle >> Engine Oil Cooler Housing Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Drain the engine coolant. Refer to Cooling System Draining and Filling .
  2. Drain the engine oil. Refer to Engine Oil and Oil Filter Replacement .
    3. Fig 1: View of Exhaust Manifold And Catalytic Converter
    GM2049036Courtesy of GENERAL MOTORS COMPANY
  3. Remove the exhaust manifold. Refer to Exhaust Manifold with Catalytic Converter Replacement (LUW) .
    4. Fig 2: Coolant Pipe Bolts And Engine Coolant Distributor Case
    GM2049564Courtesy of GENERAL MOTORS COMPANY
  4. Remove the coolant pipe bolts (1) from the engine coolant distributor case .
  5. Remove the coolant pipe bolts (2) from the engine front cover.
  6. Remove the oil cooler tightening bolts (3).
    7. Fig 3: Heat Exchanger & Gasket
    GM2049565Courtesy of GENERAL MOTORS COMPANY
  7. Remove the heat exchanger (4) with the gasket.
scientia non olet · About LEMON Manuals