Speed Sensor: Service and Repair

Transfer Case Speed Sensor Replacement

Removal Procedure





1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle Service and Repair.

2. Disconnect the speed sensor electrical connector (4).





3. Remove the speed sensor and O-ring.

4. Discard the O-ring.

Installation Procedure





Caution:
Refer to Fastener Caution Fastener Caution.

1. Install the speed sensor with a NEW O-ring.

Tighten the sensor to 17 Nm (13 lb ft).





2. Connect the speed sensor electrical connector (4).

3. Lower the vehicle.