Driver or Passenger Seat Removal and Installation

Fig 1: Front Seat Assembly & Fasteners

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
WARNING: Refer to SIR Warning . Preliminary Procedures SIR Disabling and Enabling. Refer to SIR Disabling and Enabling . Remove the front seat belt from the tensioner. Refer to Front Seat Belt Anchor Plate Tensioner Replacement .
1	Driver or Passenger Seat Fastener (Qty: 2) Procedure Clean the threads with appropriate thread chaser. Fasteners are microencapsulated. Install NEW driver or passenger seat bolts. DO NOT reuse the old bolts. Tighten 45 N.m (33 lb ft)
2	Front Seat Assembly Procedure Disconnect the electrical connector. Transfer parts as necessary.

Callout

Component Name

WARNING:

Preliminary Procedures

SIR Disabling and Enabling. Refer to SIR Disabling and Enabling .
Remove the front seat belt from the tensioner. Refer to Front Seat Belt Anchor Plate Tensioner Replacement .

Driver or Passenger Seat Fastener (Qty: 2)

Procedure

Clean the threads with appropriate thread chaser.
Fasteners are microencapsulated. Install NEW driver or passenger seat bolts. DO NOT reuse the old bolts.

Tighten
45 N.m (33 lb ft)

Front Seat Assembly

Procedure