Rear Side Door Replacement

Fig 1: View Of Rear Side Door, Hinges, Bolts & Nuts

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
WARNING: Refer to SIR Warning . Preliminary Procedures Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling . Remove the rear door trim panel. Refer to Rear Side Door Trim Panel Replacement .
1	Rear Side Door Check Link Bolt CAUTION: Refer to Fastener Caution . Tighten 20 N.m (15 lb ft)
2	Rear Side Door Hinge Upper Bolt (Qty: 2) Procedure Remove the water deflector. Support the door before removing the hinge bolts. Disconnect the electrical connector, if equipped. With the aid of an assistant, remove the door. Tighten 26 N.m (19 lb ft)
3	Rear Side Door Hinge Lower Bolt (Qty: 2) Tighten 26 N.m (19 lb ft)
4	Rear Side Door Assembly Procedure When replacing the door it is necessary to transfer all of the internal components.