Removal Procedure
WARNING:
When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.
CAUTION:
Apply pressure only at the end of the liftgate/hood assist rod that you are removing or attaching. Do NOT apply pressure to the middle of the rod because damage or bending will result.
- Open and support the rear compartment lid.
- Using a small flat-bladed tool, release the clip retaining the rear compartment lid assist rod to the lower assist rod ball stud.
- Using a small flat-bladed tool, release the clip retaining the rear compartment assist rod to the upper assist rod ball stud.
- Remove the rear compartment lid assist rod from the vehicle.