Crankshaft Rear Oil Seal and Housing Removal

WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Locating Crankshaft Rear Oil Seal Housing Bolts

Courtesy of GENERAL MOTORS CORP.

Remove the crankshaft rear oil seal housing bolts.

Fig 2: Identifying Pry Points On Edge Of The Crankshaft Rear Oil Seal Housing

Courtesy of GENERAL MOTORS CORP.

Use the pry points located at the edge of the crankshaft rear oil seal housing to separate the RTV sealant.

Fig 3: View Of Crankshaft Rear Oil Seal Housing

Courtesy of GENERAL MOTORS CORP.

Remove and discard the crankshaft rear oil seal housing.