LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Impala LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 494 (Engine Mechanical - 2.8L Or 3.0L - Repair Instructions - On Vehicle (2 Of 2)) >> Valve Rocker Arm Replacement - Right Side >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the applicable camshaft(s). Refer to Camshaft Replacement - Right Side .
  2. Fig 1: View Of Valve Rocker Arm
    GM902907Courtesy of GENERAL MOTORS CORP.
  3. Remove the rocker arms.
  4. Clean and inspect the camshaft(s) and the rocker arm(s). Repair or replace as necessary. Refer to Camshaft Cleaning and Inspection and Valve Lifter Cleaning and Inspection .
  5. Clean and inspect the valve rocker arm. Refer to Valve Rocker Arm Cleaning and Inspection