LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Impala LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 494 (Engine Mechanical - 2.8L Or 3.0L - Repair Instructions - On Vehicle (2 Of 2)) >> Valve Lifter Replacement - Left Side >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Stationary Hydraulic Lash Adjuster (SHLA)
    GM946248Courtesy of GENERAL MOTORS CORP.
  1. Install the lifters.
  2. Install the rocker arms. Refer to Valve Rocker Arm Replacement - Left Side .
  3. Install the camshafts. Refer to Camshaft Replacement - Left Side .