Secondary Air Injection Pump Hose Replacement

WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Secondary Air Injection Pump Hose

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement . Disconnect the air pump connectors. Refer to Plastic Collar Quick Connect Fitting Service .
1	Secondary Air Injection Pump Hose Fastener Procedure: Disconnect the plastic retainer. CAUTION: Refer to Fastener Caution . Tighten: 10 N.m (89 lb in)

Callout

Component Name

Preliminary Procedures

Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement .
Disconnect the air pump connectors. Refer to Plastic Collar Quick Connect Fitting Service .

Secondary Air Injection Pump Hose Fastener
Procedure:
Disconnect the plastic retainer.

CAUTION: Refer to Fastener Caution .

Tighten: 10 N.m (89 lb in)