Instrument Panel Insulator Panel Replacement - Left Side

WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Instrument Panel Insulator Panel - Left Side

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the drivers knee bolster panel. Refer to Driver Knee Bolster Panel Replacement .
1	Instrument Panel Insulator Panel Retainers (Qty: 4)
2	Instrument Panel Insulator Panel Assembly Procedure Disconnect the electrical connections. When replacing the instrument panel insulator panel, transfer all necessary components.

Callout

Component Name

Preliminary Procedure:
Remove the drivers knee bolster panel. Refer to Driver Knee Bolster Panel Replacement .

Instrument Panel Insulator Panel Retainers (Qty: 4)

Instrument Panel Insulator Panel Assembly

Procedure

Disconnect the electrical connections.
When replacing the instrument panel insulator panel, transfer all necessary components.