LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Cruze LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 218 (Engine Mechanical - 1.8L (2H0 Or LUW) - Repair Instructions - Off Vehicle (1 Of 2)) >> Water Pump Pulley Removal

Water Pump Pulley Removal

WARNING: This page is about a different car, the 2011 Chevrolet Cruze. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Water Pump And Water Pump Pulley
    GM2026887Courtesy of GENERAL MOTORS CORP.
    NOTE: Counterhold the crankshaft balancer. For this procedure the drive belt has to be installed.
  1. Loosen the 3 water pump pulley bolts (1).
  2. Remove the 3 water pump pulley bolts (1).
  3. Remove the water pump pulley (2) from the water pump (3).
scientia non olet · About LEMON Manuals