Special Tools

WARNING: This page is about a different car, the 2011 Chevrolet Cruze. However, it is still accessible from the selected car via links, so may be relevant.

EN-652: Flywheel Holder

For equivalent regional tools, refer to Special Tools .

Fig 1: Flywheel And Flywheel Holder

Courtesy of GENERAL MOTORS CORP.

Install the EN-652: holder (1). Lock the flywheel (2) or the automatic transmission flex plate via the starter ring gear.

Fig 2: Crankshaft Balancer

Courtesy of GENERAL MOTORS CORP.

Remove the bolt (1) and the crankshaft balancer (2).