LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Corvette Z06 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Automatic Transmission - 6L80 - Diagnostic Information And Procedures) >> Diagnostic Information and Procedures >> Vibration

Diagnostic Information and Procedures: Vibration

WARNING: This page is about a different variant/trim than selected.
Vibration

Checks Causes
Lug bolts for the Torque Converter (1) Inspect for loose torque converter (1) lug bolts.
Input Sun Gear Thrust Washer (55) Inspect for wear or damage.
Turbine Shaft Thrust Bearing Assembly (57) Inspect for wear or damage.
2-6 and 3-5-R Clutch Hub Thrust Bearing Assembly (65) Inspect the bearing for wear or damage.
Output Carrier Assembly (68)
  • Inspect the carrier assembly for damaged pinion gears, thrush washers, pins, and rollers.
  • Inspect for a worn or damaged center support roller bearing assembly (485).
  • Inspect for damaged thrust bearings (486, 488).
  • Inspect the carrier assembly for damaged output carrier rear sun gear thrust bearing (captured).
Output Carrier Thrust Bearing Assembly (69) Inspect the bearing for wear or damage.
Output Shaft Thrust Bearing Assembly (71) Inspect the bearing for wear or damage.
1-2-3-4 Clutch Hub Thrust Bearing Assembly (63) Inspect the bearing for wear or damage.
Turbine Shaft Thrust Bearing Assembly (57) Inspect the bearing for wear or damage.
Clutch Select Solenoid Valve Spring (353) Inspect for broken spring within the lower valve body in the torque converter clutch regulator apply valve line up (355).
scientia non olet · About LEMON Manuals