LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Corvette Z06 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Automatic Transmission - 6L80 - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Range Selector Lever Cable Adjustment

Range Selector Lever Cable Adjustment

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Releasing The Shift Control Cable Adjuster Lock
    GM73240Courtesy of GENERAL MOTORS COMPANY
  1. Shift the transmission into NEUTRAL.
  2. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
  3. Using a flat-bladed screwdriver, carefully pry to release the transmission shift control cable adjustment lock.
  4. Check to be sure that the transmission floor shift control is in the NEUTRAL detent position.
  5. Check to be sure that the transmission is in the NEUTRAL detent position.
    6. Fig 2: Depressing The Shift Control Cable Adjuster Lock
    GM73238Courtesy of GENERAL MOTORS COMPANY
  6. Press to secure the transmission shift control cable adjustment lock.
  7. Lower the vehicle.
scientia non olet · About LEMON Manuals