Input and Output Speed Sensor Replacement

WARNING: This page is about a different variant/trim than selected.

Fig 1: View Of Input & Output Speed Sensor

GM1657185

Courtesy of GENERAL MOTORS COMPANY

Input and Output Speed Sensor Replacement

Callout	Component Name
Preliminary Procedures Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle . Remove the transmission fluid pan and filter. Refer to Automatic Transmission Fluid, Fluid Pan and/or Filter Replacement . Remove the upper and lower valve body assembly. Refer to Control Valve Lower Body and Upper Body Replacement .
1	Speed Sensor Electrical Connector
2	Input and Output Speed Sensor Assembly Bolts (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 12 N.m (106 lb in)
3	Input and Output Speed Sensor Assembly Clips (Qty: 2) TIP: Inspect the wiring harness clips for damage replace if necessary.
4	Input and Output Speed Sensor Assembly