LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Corvette Z06 >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 6.2L, Or 7.0L - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Drive Belt Replacement - Accessory (LS9)

Drive Belt Replacement - Accessory (LS9)

Fig 1: Accessory Drive Belt Routing (LS9)
GM2110872Courtesy of GENERAL MOTORS COMPANY
Drive Belt Replacement - Accessory (LS9)

Callout Component Name
Preliminary Procedure 
Remove the air intake duct, if necessary. Refer to Air Cleaner Assembly Replacement (6.2L) , Air Cleaner Assembly Replacement (LS9) , Air Cleaner Assembly Replacement (7.0L) .
1 Drive Belt

Procedure

  1. Use a 3/8 inch breaker bar to rotate the drive belt tensioner.
  2. Remove the drive belt from the pulleys and tensioner.
2 Drive Belt

Procedure

  1. Clean and inspect the drive belt surfaces of all the pulleys.
  2. Inspect the accessory drive belt for correct alignment.
scientia non olet · About LEMON Manuals