LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Corvette Z06 >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Engine Controls/Fuel - 6.2L, Or 7.0L - Repair Instructions >> Repair Instructions >> Evaporative Emission Canister Purge Tube Replacement (LS9)

Evaporative Emission Canister Purge Tube Replacement (LS9)

Fig 1: Identifying Evaporative Emission Canister Purge Tube
GM2157363Courtesy of GENERAL MOTORS COMPANY
Evaporative Emission Canister Purge Tube Replacement (LS9)

Callout Component Name
Preliminary Procedure 
Remove the upper intake cover. Refer to Upper Intake Manifold Sight Shield Replacement (LS9) , Upper Intake Manifold Sight Shield Replacement (w/o LS9)
1 Evaporative Emission Canister Purge Tube

Procedure

  1. Disconnect the EVAP canister purge tube from the purge valve.
  2. Disconnect the EVAP canister purge tube from the EVAP canister purge Pipe.
scientia non olet · About LEMON Manuals