Evaporative Emission Canister Purge Solenoid Valve Replacement (LS9)

Fig 1: Evaporative Emission Canister Purge Solenoid Valve (LS9)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the upper intake cover. Refer to Upper Intake Manifold Sight Shield Replacement (LS9) , Upper Intake Manifold Sight Shield Replacement (w/o LS9)
1	Bolt CAUTION: Refer to Fastener Caution . Tighten 10 N.m (89 lb in)
2	Evaporative Emission Canister Purge Valve Procedure Disconnect the EVAP canister purge valve harness connector. Disconnect the EVAP canister purge tube from the purge valve.

Callout

Component Name

Bolt

CAUTION:

Tighten
10 N.m (89 lb in)

Evaporative Emission Canister Purge Valve

Procedure