Front Fender Replacement

Fig 1: View Of Fender Assembly & Bolts

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the front headlamp assembly. Refer to High Intensity Discharge Headlamp Replacement . Remove the air inlet grille. Refer to Air Inlet Grille Panel Replacement .
1	Fender Bolt (Qty: 10) CAUTION: Refer to Fastener Caution . Tighten 2 N.m (18 lb in)
2	Fender Assembly TIP: Transfer any brackets or harness that might be attached to the fender assembly.

Callout

Component Name

Preliminary Procedures

Remove the front headlamp assembly. Refer to High Intensity Discharge Headlamp Replacement .
Remove the air inlet grille. Refer to Air Inlet Grille Panel Replacement .

Fender Bolt (Qty: 10)

CAUTION:

Tighten
2 N.m (18 lb in)

Fender Assembly
TIP: Transfer any brackets or harness that might be attached to the fender assembly.