Circuit/System Verification
WARNING: This page is about a different car, the 2011 GMC Cab & Chassis Sierra, 2011 Chevrolet Suburban, and 2011 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Allow brakes to cool down before performing test.
- With a scan tool clear the DTC.
- Test drive the vehicle under normal braking conditions and without causing traction control system or ABS activation. Verify DTC C0179 does not reset.
- If the DTC resets, replace the EBCM.