LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Corvette Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 262 (Antilock Brake System - Greater Than Or Equal To 3900 Kg (8600 Lb) GVW) >> Diagnostic Information and Procedures >> DTC C0131 >> Circuit/System Testing

Circuit/System Testing

WARNING: This page is about a different car, the 2011 GMC Cab & Chassis Sierra, 2011 Chevrolet Suburban, and 2011 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply and release brake pedal. Verify brake lamps operate properly.
  2. Replace the brake pressure modulator valve.
    • If the DTC resets, replace the EBCM.
scientia non olet · About LEMON Manuals