Instrument Cluster Replacement (Cadillac)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Instrument Cluster (Cadillac)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove the instrument panel cluster trim plate bezel. Refer to Instrument Cluster Trim Panel Replacement (Cadillac) .
1	Instrument Panel Cluster Assembly Bolts/Screw (Qty: 4) CAUTION: Refer to Fastener Caution . Tighten 2 N.m (18 lb in)
2	Instrument Panel Cluster Assembly Disconnect electrical connections. A replacement cluster must be programmed. Refer to Control Module References .