LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Corvette Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 235 (Parking Brake System) >> Repair Instructions >> Parking Brake Release Handle Assembly Replacement

Parking Brake Release Handle Assembly Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Park Brake Release Handle Assembly
GM1688517Courtesy of GENERAL MOTORS CORP.
Parking Brake Release Handle Assembly Replacement

Callout Component Name
1 Park Brake Release Handle Bolt (Qty: 1)
CAUTION:

Refer to Fastener Caution .


Tighten 
9 N.m (80 lb in)
2 Park Brake Release Handle Cable
TIP:  Slide the park brake release cable forward to remove it from the park brake module.
3 Park Brake Release Handle
scientia non olet · About LEMON Manuals