Radiator Vent Inlet Hose Replacement (Non-HP2)

WARNING: This page is about a different variant/trim than selected.

Fig 1: View Of Radiator Vent Inlet Hose & Components

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Drain the cooling system. Refer to Cooling System Draining and Filling (Static Fill) . If necessary, remove the air cleaner resonator duct. Refer to Air Cleaner Resonator Outlet Duct Replacement .
1	Remove Radiator Vent Inlet Hose Clamp (Qty: 2)
2	Remove Radiator Vent Inlet Hose Support Clip (Qty: 2)
3	Radiator Vent Inlet Hose