Radiator Vent Inlet Hose Replacement (HP2)

WARNING: This page is about a different variant/trim than selected.

Fig 1: Radiator Vent Inlet Hose (HP2)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Drain the cooling system. Refer to Cooling System Draining and Filling (Static Fill) . If necessary, remove the air cleaner resonator duct. Refer to Air Cleaner Resonator Outlet Duct Replacement .
1	Radiator Vent Inlet Hose Clamp (Qty: 2) TIP: Using J 38185 hose clamp pliers, reposition the radiator vent hose clamps. Special Tools J 38185 Hose Clamp Pliers
2	Radiator Vent Inlet Hose

Callout

Component Name

Preliminary Procedures

Drain the cooling system. Refer to Cooling System Draining and Filling (Static Fill) .
If necessary, remove the air cleaner resonator duct. Refer to Air Cleaner Resonator Outlet Duct Replacement .

Radiator Vent Inlet Hose Clamp (Qty: 2)
TIP: Using J 38185 hose clamp pliers, reposition the radiator vent hose clamps.
Special Tools
J 38185 Hose Clamp Pliers

Radiator Vent Inlet Hose