4-5-6 Clutch Piston Removal
WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
4-5-6 Clutch Piston Removal
| Callout | Component Name |
|---|---|
| 1 | 4-5-6 Clutch Piston Dam Retaining Ring
NOTE:
Use care when compressing the 4-5-6 clutch piston assembly, spring and dam assembly. Compressing the dam assembly too much may damage it.
NOTE:
Refer to Retaining Ring Reuse Notice
. Special Tool: J 43074 Clutch Spring Compressor. See Special Tools . |
| 2 | 4-5-6 Clutch Piston Dam Assembly Tip: It may be necessary to apply air pressure to remove the dam and piston. |
| 3 | 4-5-6 Clutch Spring |
| 4 | 4-5-6 Clutch Piston Assembly Tip: It may be necessary to apply air pressure to remove the piston. |