Removal Procedure

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Transmission Harness 20-Way Connector & VSS Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
Disconnect the vehicle speed sensor (VSS) electrical connector (2).

Fig 2: View Of VSS, Bolt & O-Ring Seal

Courtesy of GENERAL MOTORS CORP.

Remove the VSS bolt (2).
Remove the VSS (1).
Remove the O-ring seal (3).