1-2 Accumulator Disassemble
WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of GENERAL MOTORS CORP.
IMPORTANT:
Some models may not use an outer 1-2 accumulator spring (54).
- Blow air into the 1-2 accumulator housing (57) to remove the 1-2 accumulator piston (56).
- Remove the 1-2 inner (104) and outer (54) accumulator springs.