LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Tahoe PPV >> Repair and Diagnosis >> External Pages >> Different car >> Section 856 (Interior Trim And Paneling) >> Repair Instructions >> Rear Window Lower Garnish Molding Replacement (Ext Cab/Crew Cab w/A48)

Rear Window Lower Garnish Molding Replacement (Ext Cab/Crew Cab w/A48)

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Rear Window Lower Garnish Molding (Ext Cab/Crew Cab w/A48)
GM1714413Courtesy of GENERAL MOTORS CORP.
Rear Window Lower Garnish Molding Replacement (Ext Cab/Crew Cab w/A48)

Callout Component Name
Preliminary Procedure: 
Remove child seat restraint system belt bracket. Refer to Child Seat Restraint System Belt Bracket Replacement (Ext Cab/Crew Cab) .
1 Rear Window Lower Garnish Molding Assembly
Tip: 
  1. Remove the front and rear seat belt guide covers.
  2. Ensure webbing is routed through guide loop.
  3. Route belt webbing through garnish molding.
  4. Drop garnish molding over guide loop and then secure.
2 Rear Window Lower Garnish Right Molding Assembly
3 Rear Window Lower Garnish Molding Retainer Clip (Qty: 9)
scientia non olet · About LEMON Manuals