Center Pillar Lower Garnish Molding Replacement

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Center Pillar Lower Garnish Molding

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove front door sill plate. Refer to Front Side Door Sill Plate Replacement (Regular Cab/Crew Cab) or Front Side Door Sill Plate Replacement (Extended Cab) . Remove rear door sill plate. Refer to Rear Side Door Sill Plate Replacement (Extended Cab) or Rear Side Door Sill Plate Replacement (Crew Cab) .
1	Center Pillar Lower Garnish Molding Assembly Tip: Ensure seat belt webbing does not become trapped during installation. Tab to be fully seated and installed prior to retainer.
2	Center Pillar Lower Garnish Molding Retainer (Qty: 2)

Callout

Component Name

Preliminary Procedures

Remove front door sill plate. Refer to Front Side Door Sill Plate Replacement (Regular Cab/Crew Cab) or Front Side Door Sill Plate Replacement (Extended Cab) .
Remove rear door sill plate. Refer to Rear Side Door Sill Plate Replacement (Extended Cab) or Rear Side Door Sill Plate Replacement (Crew Cab) .

Center Pillar Lower Garnish Molding Assembly
Tip:

Ensure seat belt webbing does not become trapped during installation.
Tab to be fully seated and installed prior to retainer.

Center Pillar Lower Garnish Molding Retainer (Qty: 2)