Center Seat Replacement

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Front Seat Assembly & Components

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove the front seat adjuster covers. Refer to Front Seat Adjuster Track Finish Cover Replacement . Disconnect the seat belt from the seat. Refer to Seat Belt Retractor Pretensioner Replacement - Front (Regular Cab) or Seat Belt Retractor Pretensioner Replacement - Front (Extended Cab) or Seat Belt Retractor Pretensioner Replacement - Front (Crew Cab) .
1	Front Seat Assembly Nut (Qty: 4) NOTE: Refer to Fastener Notice . Tip: Adjust the seat rearward to access the nuts. Tighten: 45 N.m (33 lb ft)
2	Front Seat Assembly Bolt (Qty: 4) Tip: Adjust the seat forward to access the bolts. Tighten: 45 N.m (33 lb ft)
3	Front Seat Assembly (Qty: 2) Tip: Disconnect the electrical connector.
4	Front Center Seat Assembly