LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Tahoe PPV >> Repair and Diagnosis >> External Pages >> Different car >> Section 1677 (Engine Mechanical - 6.6L (LMM) - Repair Instructions - Off Vehicle (2 Of 3)) >> Oil Pump Suction Pipe and Screen Assembly Installation

Oil Pump Suction Pipe and Screen Assembly Installation

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Oil Pump Pipe, Screen Assembly & Gasket
    GM660531Courtesy of GENERAL MOTORS CORP.
  1. Install the oil pump pipe and screen gasket.
  2. Install the oil pump pipe and screen.
    3. CAUTION: Refer to Fastener Caution .
  3. Install the oil pump pipe and screen assembly bolts and nuts.
    1. Tighten the oil pump pipe and screen assembly bolts to 25 N.m (18 lb ft) .
    2. Tighten the oil pump pipe and screen assembly nuts to 25 N.m (18 lb ft) .
scientia non olet · About LEMON Manuals