LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Tahoe PPV >> Repair and Diagnosis >> External Pages >> Different car >> Section 1677 (Engine Mechanical - 6.6L (LMM) - Repair Instructions - Off Vehicle (2 Of 3)) >> Intake Manifold Cleaning and Inspection

Intake Manifold Cleaning and Inspection

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Intake Manifold Crossover Inspection Areas
    GM1336129Courtesy of GENERAL MOTORS CORP.
  1. Clean the intake manifold crossover.
  2. Clean the intake manifold mating surfaces.
  3. Fig 2: View Of Intake Manifold Inspection Areas
    GM1336130Courtesy of GENERAL MOTORS CORP.
  4. Clean the intake manifolds.
  5. Clean the intake manifold mating surfaces.
  6. Inspect the intake manifolds for cracks.
  7. Inspect the intake manifold mating surfaces for damage.
  8. Replace the intake manifolds if any damage is found.