Flywheel Housing Cleaning and Inspection
WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the O-rings from the flywheel housing and discard.
- Clean the flywheel housing.
- Clean the flywheel housing mating surfaces.
- Clean the flywheel housing O-ring sealing area.
- Inspect the flywheel housing for cracks.
- Inspect the flywheel housing mating surfaces for damage.
- Inspect the crankshaft rear oil seal bore for damage.
- Replace the flywheel housing if any damage is found.