LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Tahoe PPV >> Repair and Diagnosis >> External Pages >> Different car >> Section 1327 (Antilock Brake System - Non-Hybrid Less Than 3900 Kg (8600 Lb) GVW) >> Specifications >> Fastener Tightening Specifications

Fastener Tightening Specifications

WARNING: This page is about a different car, the 2009 GMC Sierra and 2009 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Application Specification
Metric English
Brake Pipe Fitting - Brake Pressure Modulator Valve (BPMV) Inlet With JL4 32 N.m 24 lb ft
Brake Pipe Fitting - BPMV Inlet Without JL4 25 N.m 18 lb ft
Brake Pipe Fitting 18 N.m 13 lb ft
BPMV Bracket Bolt 22 N.m 16 lb ft
BPMV Nut 9 N.m 80 lb in
Electronic Brake Control Module (EBCM) Bolt 3 N.m 27 lb in
Wheel Speed Sensor Bolt - Front 18 N.m 13 lb ft
Wheel Speed Sensor Bolt - Rear 9 N.m 80 lb in
Yaw Rate Sensor with Vehicle Lateral and Longitudinal Accelerometer Nut 7 N.m 62 lb in