Instrument Cluster Replacement (Without RPO SLT)

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Instrument Panel Cluster Assembly & Screws

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the instrument panel cluster trim panel. Refer to Instrument Cluster Trim Panel Replacement (with RPO SLT) or Instrument Cluster Trim Panel Replacement (without RPO SLT) .
1	Instrument Panel Cluster Assembly Screw (Qty 4) CAUTION: Refer to Fastener Caution . Tighten: 2 N.m (18 lb in)
2	Instrument Panel Cluster Assembly Tip: Disconnect the electrical connections. A replacement cluster assembly must be programmed. Refer to Control Module References .