LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Tahoe PPV >> Repair and Diagnosis >> External Pages >> Different car >> Section 1288 (Instrument Panel Trim And Console Trim) >> Repair Instructions >> Floor Console Bezel Replacement

Floor Console Bezel Replacement

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Floor Console Bezel Assembly & Clip
GM1831576Courtesy of GENERAL MOTORS CORP.
Callout Component Name
1 Front Floor Console Bezel Assembly
Tip: 
  1. Use a flat-bladed plastic trim tool to release the retainer clips along the rear edge of the bezel.
  2. Lift the bezel out of the console assembly.
  3. If replacing the front floor console bezel assembly, transfer all necessary components.
2 Retainer Clip (Qty: 4)