Rear Seat Replacement (Extended Cab with A68)

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Rear Seat (Extended Cab with A68)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Rear Seat Belt Anchor Nut CAUTION: Refer to Fastener Caution . Tip: Fold the rear seat cushion up to access the nut. Tighten: 50 N.m (37 lb ft)
2	Rear Seat Nut (Qty: 4) Tighten: 50 N.m (37 lb ft)
3	Rear Seat Bolt Tighten: 50 N.m (37 lb ft)
4	Rear Seat Assembly Tip: Split the rear seats if only one seat is to removed at a time. Refer to Rear Seat Separation (Extended Cab With A68) . Lift the seat assembly upward to release the rear seat back hooks from the rear of the cab.