Torque Converter Installation and Holding Fixture Removal (6L80/6L90)

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Torque Converter Installation and Holding Fixture Removal (6L80/6L90)

Courtesy of GENERAL MOTORS CORP.

Callout	Procedure
Preliminary Procedure: Rotate the transmission so that the fluid pan assembly is down.
1	Transmission Case Assembly Special Tools DT 47605 Holding Fixture Adapter. See Special Tools . J 3289-20 Holding Fixture Base Assembly. See Special Tools . J 8763-B Holding Fixture. See Special Tools .
2	Torque Converter Assembly

Callout

Procedure

Preliminary Procedure:
Rotate the transmission so that the fluid pan assembly is down.

Transmission Case Assembly

Special Tools

DT 47605 Holding Fixture Adapter. See Special Tools .
J 3289-20 Holding Fixture Base Assembly. See Special Tools .
J 8763-B Holding Fixture. See Special Tools .

Torque Converter Assembly