Input and Output Speed Sensor Assembly Removal
WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Input and Output Speed Sensor Assembly Removal
| Callout | Component Name |
|---|---|
| 1 | Bolt M6 x 20 (Qty: 2) |
| 2 | Speed Sensor Electrical Connector Tip: Release the connector lock before disconnecting. |
| 3 | A/Trans Input and Output Speed Sensor Assembly |
| 4 | A/Trans Input and Output Speed Sensor Wiring Harness Clip (Qty: 2) Tip: Inspect the clips and replace if damaged. |