LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Tahoe Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1546 (Interior Trim System And Paneling) >> Repair Instructions >> Rear Window Lower Garnish Molding Replacement (Ext Cab/Crew Cab w/o A48)

Rear Window Lower Garnish Molding Replacement (Ext Cab/Crew Cab w/o A48)

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Rear Window Lower Garnish Molding (Ext Cab/Crew Cab w/o A48)
GM1714414Courtesy of GENERAL MOTORS CORP.
Callout Component Name
Preliminary Procedure: 
Remove child seat restraint system belt bracket. Refer to Child Seat Restraint System Belt Bracket Replacement (Ext Cab/Crew Cab) .
1 Rear Window Lower Garnish Molding Assembly
Tip: 
  1. Remove the front and rear seat belt guide covers.
  2. Ensure webbing is routed through guide loop.
  3. Route belt webbing through garnish molding.
  4. Drop garnish molding over guide loop and then secure.
2 Rear Window Lower Garnish Molding Retainer Clip (Qty: 6)
scientia non olet · About LEMON Manuals