Center Pillar Lower Garnish Molding Replacement

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Center Pillar Lower Garnish Molding

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove front door sill plate. Refer to Front Side Door Sill Trim Plate Replacement (Extended Cab) or Front Side Door Sill Trim Plate Replacement (Regular Cab/Crew Cab) . Remove rear door sill plate. Refer to Rear Side Door Sill Trim Plate Replacement (Crew Cab) or Rear Side Door Sill Trim Plate Replacement (Extended Cab) .
1	Center Pillar Lower Garnish Molding Assembly Tip: Ensure seat belt webbing does not become trapped during installation. Tab to be fully seated and installed prior to retainer.
2	Center Pillar Lower Garnish Molding Retainer (Qty: 2)

Callout

Component Name

Preliminary Procedures

Remove front door sill plate. Refer to Front Side Door Sill Trim Plate Replacement (Extended Cab) or Front Side Door Sill Trim Plate Replacement (Regular Cab/Crew Cab) .
Remove rear door sill plate. Refer to Rear Side Door Sill Trim Plate Replacement (Crew Cab) or Rear Side Door Sill Trim Plate Replacement (Extended Cab) .

Center Pillar Lower Garnish Molding Assembly
Tip:

Ensure seat belt webbing does not become trapped during installation.
Tab to be fully seated and installed prior to retainer.

Center Pillar Lower Garnish Molding Retainer (Qty: 2)